TDA7449

Datasheet

The TDA7449 is a volume tone (bass and treble) balance (left/right) processor for quality audio applications in TV systems. Selectable input gain is provided. A serial bus controls all functions. The AC signal setting is obtained by resistor networks and switches combined with operational amplifiers. Bipolar/CMOS technology used allows obtaining low distortion, low noise and DC stepping.

tda7449.pdf

Обновлено: 22.02.2021 в 11:52 | Просмотров: 764
Загрузка...
Похожие статьи
TDA7379
The TDA7379 is a new technology class AB audio processor amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantee the highest power performances with extremely reduced component count. The on board clip detector simplifies gain compression operation. The fault diagnostic makes it possible to detect mistakes during the set assembly and wiring in the...

AD420
The AD420 is a complete digital to current loop output converter, designed to meet the needs of the industrial control market. It provides a high precision, fully integrated, low cost single-chip solution for generating current loop signals in a compact 24-lead SOIC or PDIP package. The output current range can be programmed to 4 mA–20 mA, 0 mA–20 mA or an overrange function of 0 mA–24 mA. The AD420 can alternatively provide a voltage output from a separate pin that can be configured to provide...

NE5532
The NE5532, NE5532A, SA5532, and SA5532A are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise...

TDA7303
The TDA7303 is a volume, tone (bass and treble) balance (left/right) and fader (front/rear) processor for quality audio applications in car radio, Hi-Fi and portable systems. Selectable input gain and external loudness function are provided. Control is accomplished by serial I2C bus microprocessor interface. The AC signal setting is obtained by resistor networks and switches combined with operational amplifiers. Thanks to the used bipolar/CMOS technology, low distortion, low noise and low DC...

DIR9001
The DIR9001 can decode the biphase signal format which is specified in one of the following standards. Generally, these following standards may be called Sony/Philips digital interface format (S/PDIF) or AES/EBU. • IEC60958 (revised edition of former IEC958) • JEITA CPR-1205 (revised edition of former EIAJ CP-1201, CP-340) • AES3 • EBU tech3250 The sampling frequency range and data word length which DIR9001 can decode is as follows: • Sampling frequency range is 28 kHz to 108 kHz. • Maximum...

Добавить комментарий

Войти с помощью: